Joseph Bartholomew

What Is A Gear Pump?  A gear pump applies positive displacement to pump fluid by meshing gears. They are probably the most frequently utilized pump types in hydraulic power systems for fluids. Johannes Kepler developed the gear pump probably in the 1600s. Highly viscous liquids are also routinely transported in chemical plants utilizing gear pumps. […]

What is Graphite? One of the most commonly encountered kinds of carbon is graphite. Since it is the most stable form of carbon, electrochemistry uses it as a starting state to determine the heat of the manufacture of carbon compounds. Graphite has a density of 2.09–2.23 g/cm3, making it a strong heat and electrical conductor.

What is constrained motion? When anything is allowed to move in a limited manner, it is considered to be in constrained motion. It could have to slide on a table that accelerates upward, go down a curving track, maintain touch with an accelerating wedge, etc. when a particle receives externally generated forces that cause it

There have been two primary forms of clutch action in automobiles with transmissions that are manual over the years: hydraulic and mechanical. While almost all current motor vehicles employ a hydraulic clutch, many older cars have a mechanical or cable mechanisms. Lets get started! What is a Hydraulic Clutch? The clutch disc of a hydraulic

What is single plate clutch? The most common form of clutch plate used in vehicles is the single-plate clutch. It is constructed from a single clutch plate that is attached to the clutch plate’s splines. The engine crankshaft sits where the flywheel remains stationary and it rotates in conjunction with it. Two separate parts constitute

What Is A Clutch? A clutch is a mechanical mechanism that activates and deactivates the transfer of power, particularly between a driven and a drive shaft. The clutch functions as the engine and transmission’s mechanical link. And when the pedal is depressed, it temporarily disconnects or separates the engine from the drive train and, therefore,

A form of machining that makes use of heat directed from a laser beam is called laser beam machining, or LBM. Thermal energy is applied in this process to remove material from surfaces that may be either metallic or nonmetallic. Whenever a high frequency monochromatic light falls on a surface, photons penetrate and cause the

What Is A Fluid? Whatever substance, no matter how little, that is frequently (deformed) under shear stress is called a fluid. A fluid is a subset of matter’s phases consisting of liquids, gases, plasmas, and, to a lesser degree, plastic solids. The term “fluid” is frequently used indiscriminately with “liquid,” however it does not imply

What is Thermosetting Plastic? A polymer referred to as thermosetting plastic contracts indefinitely when heated. A different term for this kind of material is a thermoset or thermosetting polymer. The polymer is a liquid or soft solid at first. Heat fuels chemical reactions that strengthen the connections between polymer chains, causing the plastic to cure.

What Is Screw Pump A screw pump, occasionally referred to as a water screw, is an instance of positive displacement (PD) pump that transports liquids or solids along the screw axis using one or more screws. In the simplest possible form, material is moved along the screw’s spindle by a single screw rotating within a